Aluminum sheet roll for aluminum trim coil overview
The aluminum trim coil is widely used for wrapping home’s exterior trim surfaces such as window and door casings, sundurma mesajları, damlama kenarı, ve fasya. Huawei Alüminyum trim bobini temiz bir görünüm oluşturur, Sert hava koşullarına dayanıklı keskin yüzey. Hemen hemen her şekle alan oluşturulabilir.
1100 alüminyum trim bobini
1000 seri alüminyum bobin is widely used in the production of aluminium trim. 1100 aluminium alloy is an aluminum-based alloy in the “commercially pure” wrought family (1000 or 1xxx series). minimum ile 99.0% alüminyum, it is the most heavily alloyed of the 1000 diziler. It is also the mechanically strongest alloy in the series and is the only 1000-series alloy commonly used in rivets. Aynı zamanda, nispeten hafif alaşımlı olmanın faydalarını korur (diğer serilere kıyasla), yüksek elektrik iletkenliği gibi, thermal conductivity, korozyon direnci, and workability. It can be strengthened by cold working, but not by heat treatment.
1100 aluminum trim coil machinability:
Aluminum/Aluminum 1100 alloy has excellent machinability especially when the alloy is machined in a hard temper. Carbide tooling is suitable, but high-speed steel tooling can also be used. In cases where heavy cuts are required, an oil lubricant must be used.
Aluminum trim coil forming:
Both hot and cold forming is easy to perform with Aluminium/Aluminum 1100 alaşım. This alloy can be cold worked extensively in the annealed condition without the need for intermediate annealing.
Type of aluminum trim coil
Aluminum trim coils are available in many colors and can be sorted by color.
|White aluminum trim coil||Gray aluminum trim coil||Aspen aluminum trim coil|
|Birchwood aluminum trim coil||Black aluminum trim coil||Cafe Cream aluminum trim coil|
|Cocoa Brown aluminum trim coil||Geneva Blue aluminum trim coil||Ocean Blue aluminum trim coil|
Aluminum trim coil welding:
Welding can be easily performed using all the conventional methods. It is suitable to use AL 1100 consumable electrodes and filler wire for the process.
Aluminum sheet roll for aluminium trim coil heat treatment:
Aluminium/Aluminum 1100 alloy cannot be successfully heat-treated other than to produce the annealed form and ‘O’ temper.
Forging: Aluminium/Aluminum 1100 alloy can be hot forged without much difficulty.
Hot Working:Hot-working can be easily performed on Aluminium/Aluminum 1100 alaşım.
Cold Working: Aluminium/Aluminum 1100 alloy is best suited for cold working as it has good ductility in the annealed temper condition. It can also be cold formed by bending, çizim, or spinning.
Aluminum trim coil annealing
After Aluminium/Aluminum 1100 alloy is extensively cold worked, annealing is required and can be performed at 343°C (650°F) for a suitable amount of time so as to ensure thorough heating and then it can be air-cooled.
Hardening: Aluminium/Aluminum 1100 alloy can be hardened by cold working only.
Uygulamalar: Aluminium/Aluminum 1100 alloy is widely used in fin stock, heat exchanger fins, spun hollowware, dials and nameplates, decorative parts, giftware, mutfak aletleri, rivets and reflectors, and in sheet metal work.